Hand Tools

Spanners & Sockets

1/2in Drive Impact Sockets

Combination Spanners

Open Ended Spanners

Ring Spanners

Ratcheting Spanners

Flare Nut Spanners

1/4in Drive Sockets

1/4in Drive Socket Sets

3/8in Drive Sockets

3/8in Drive Impact Sockets

3/8in Drive Socket Sets

1/2in Drive Sockets

1/2in Drive Socket Sets

Multi-Drive Socket Sets

3/4in Sockets

3/4in Drive Impact Sockets

3/4in Socket Sets

1in Drive Sockets

1in Drive Impact Sockets

1.1/2in Drive Impact Sockets

Chalk & Builders Lines

Chisels

Clamps

Hammers

Hex & Torx Keys

Knives

Spirit & Laser Levels

Magnets

Measuring

Multitools

Planes

Pliers & Cutters

Plumbing & Pipework

Punches

Saws

Screwdrivers

Snips

Squares, Bevels & Gauges

Staplers & Tackers

Tool Lanyards

Torches & Batteries

Trowels

Wrenches

Powertool Accessories

Screws & Fasteners

Fixings

Abrasives

Abrasives

Safety & Workwear

Storage Products

Workshop & Site

Garden & Landscape

Decorating

1/2in Drive Impact Sockets

Product Range |  Hand Tools |  Spanners & Sockets |  1/2in Drive Impact Sockets

Unior 1/2in SD Impact Sockets - (Product #00885)

Unior impact sockets for use with all air and power tools European manufactured, highest quality chrome molybdenum steel, heat treated Dimensions conform to DIN 3129, ISO 2725-2 Stress relief drive to reduce wear and provide a secure grip Available in metric and inch A/F sizes   Metric size 11mm - £2.78 - £2.78 10mm - £2.78 - £2.78 12mm - £2.78 - £2.78 13mm - £2.78 - £2.78 14mm - £2.87 - £2.87 15mm - £3.18 - £3.18 size 16mm - £3.24 - £3.24 18mm - £3.65 - £3.65 19mm - £3.65 - £3.65 21mm - £4.19 - £4.19 22mm - £4.19 - £4.19 17mm - £3.24 - £3.24 23mm - £4.33 - £4.33 24mm - £4.52 - £4.52 27mm - £5.60 - £5.60 28mm - £6.12 - £6.12 30mm - £6.33 - £6.33 32mm - £6.85 - £6.85 A/F Size size 11/16in - £4.14 - £4.14 3/8in - £3.16 - £3.16 5/8in - £3.67 - £3.67 1/2in - £3.16 - £3.16 9/16in - £3.26 - £3.26 3/4in - £4.14 - £4.14 7/8in - £4.74 - £4.74 15/16in - £5.11 - £5.11 1in - £5.39 - £5.39 1.1/16in - £6.33 - £6.33 1.1/8in - £6.93 - £6.93 1.1/4in - £7.76 - £7.76 1.5/16in - £7.88 - £7.88 5/16in - £3.16 - £3.16 7/16in - £3.16 - £3.16 13/16in - £4.74 - £4.74 1.3/16in - £7.18 - £7.18 1.3/8in - £8.01 - £8.01 1.7/16in - £8.55 - £8.55 1.1/2in - £9.23 - £9.23   Quantity:

Unior 1/2in SD Deep Impact Sockets - (Product #00886)

Unior deep impact sockets for use with all air and power tools European manufactured, highest quality chrome molybdenum steel, heat treated Dimensions conform to DIN 3129, ISO 2725-2 Stress relief drive to reduce wear and provide a secure grip Available in metric and inch A/F sizes Unior also produce longer sockets (metric only) - XL 150mm deep, XXL 200mm deep and XXXL 250mm deep - prices on application   Metric size 11mm - £4.66 - £4.66 10mm - £4.66 - £4.66 12mm - £4.66 - £4.66 13mm - £4.66 - £4.66 14mm - £4.66 - £4.66 17mm - £5.57 - £5.57 size 16mm - £5.57 - £5.57 18mm - £5.57 - £5.57 19mm - £5.57 - £5.57 21mm - £5.57 - £5.57 22mm - £5.81 - £5.81 15mm - £5.57 - £5.57 23mm - £5.91 - £5.91 24mm - £6.77 - £6.77 27mm - £7.48 - £7.48 28mm - £7.93 - £7.93 30mm - £7.81 - £7.81 32mm - £8.23 - £8.23 A/F Size size 11/16in - £6.30 - £6.30 5/8in - £6.30 - £6.30 9/16in - £6.30 - £6.30 3/4in - £6.30 - £6.30 15/16in - £6.68 - £6.68 1in - £7.67 - £7.67 1.1/16in - £8.48 - £8.48 1.1/8in - £8.99 - £8.99 1.1/4in - £9.32 - £9.32 1.5/16in - £10.19 - £10.19 5/16in - £5.27 - £5.27 3/8in - £5.27 - £5.27 7/16in - £5.27 - £5.27 1/2in - £5.27 - £5.27 13/16in - £6.30 - £6.30 7/8in - £6.57 - £6.57 1.3/16in - £8.84 - £8.84 1.3/8in - £10.60 - £10.60 1.7/16in - £10.89 - £10.89 1.1/2in - £11.96 - £11.96   Quantity:

Unior 1/2in SD Impact Sockets For Alloy Wheels - (Product #01895)

Unior impact sockets for use with all air and power tools European manufactured, highest quality chrome molybdenum steel, heat treated Dimensions conform to DIN 3129, ISO 2725-2 The plastic protection cap prevents scratching of polished stud recesses Colour-coded for ease of selection The set of 3 are 17, 19 and 21mm Metric size 17mm - £10.19 - £10.19 size 19mm - £10.19 - £10.19 21mm - £10.34 - £10.34 15mm - £9.77 - £9.77 Set of 3 - £28.95 - £28.95     Quantity:

Unior 1/2in SD Impact Sockets with Internal TX Profile - (Product #01896)

Unior impact sockets for use with all air and power tools European manufactured, highest quality chrome molybdenum steel, heat treated Dimensions conform to DIN 3129, ISO 2725-2 For use on screws with an external Torx profile often found on motor vehicles External TX profiles are considerably larger than the corresponding internal TX drive sizes External TX size E12 - £5.11 - £5.11 size E14 - £5.11 - £5.11 E16 - £5.11 - £5.11 E10 - £5.02 - £5.02 E18 - £5.37 - £5.37 E20 - £5.37 - £5.37 E24 - £5.51 - £5.51     Quantity:

Unior 1/2in SD Impact Sockets with External TX Profile - (Product #01897)

Unior impact sockets for use with all air and power tools European manufactured, highest quality chrome molybdenum steel, heat treated Dimensions conform to DIN 3129, ISO 2725-2 For use on screws with an internal recessed Torx profile Internal TX size TX40 - £6.72 - £6.72 size TX45 - £6.79 - £6.79 TX50 - £6.79 - £6.79 TX30 - £6.26 - £6.26 TX55 - £8.28 - £8.28 TX60 - £9.11 - £9.11 TX70 - £9.50 - £9.50     Quantity:

Unior 1/2in SD Impact Sockets with External Hexagon - (Product #01898)

Unior impact sockets for use with all air and power tools European manufactured, highest quality chrome molybdenum steel, heat treated Dimensions conform to DIN 3129, ISO 2725-2 For use on screws with an internal recessed hexagon profile Hexagon size 6mm - £5.63 - £5.63 size 8mm - £5.63 - £5.63 10mm - £5.63 - £5.63 5mm - £5.63 - £5.63 12mm - £5.63 - £5.63 14mm - £5.63 - £5.63 17mm - £6.37 - £6.37 19mm - £7.22 - £7.22     Quantity:

Unior 1/2in SD Impact Extension Bars - (Product #01899)

Unior impact socket extension bars for use with all air and power tools European manufactured, highest quality chrome molybdenum steel, heat treated Dimensions conform to DIN 3129, ISO 2725-2 Size 75mm - £5.75 - £5.75 125mm - £6.94 - £6.94     Quantity:

Unior 1/2in SD Impact Universal Joint - (Product #01900)

Unior impact socket universal Joint for use with all air and power tools European manufactured, highest quality chrome molybdenum steel, heat treated Dimensions conform to DIN 3129, ISO 2725-2   £13.85   Quantity:

Unior 1/2in SD Impact Adaptors - (Product #01901)

Unior impact socket adaptors for use with all air and power tools European manufactured, highest quality chrome molybdenum steel, heat treated Dimensions conform to DIN 3129, ISO 2725-2 Size 1/2 F to 3/4 M - £7.44 - £7.44 1/2 F to 3/8 M - £6.83 - £6.83     Quantity:

Unior 1/2in SD Impact Retaining Ring & Pin - (Product #01902)

Unior impact socket retaining ring and pin Steel pin and rubber ring ensure socket cannot detach from accessories in use See drop down list for specific size suitability Dimensions conform to DIN 3129, ISO 2725-2 Size 10-15mm sockets - £2.20 - £2.20 16-32mm sockets - £3.24 - £3.24     Quantity:

Unior 1/2in SD Impact Socket Set Standard Length - (Product #01904)

Set contains: 75mm extension bar and retaining rings and pins 9 standard length impact sockets: 15, 17, 18, 19, 21, 22, 24, 27 and 30mm Supplied in a fitted metal storage box/ul>   £62.73   Quantity:

Unior 1/2in SD Impact Socket Set Long Series - (Product #01905)

Set contains: 75mm extension bar and retaining rings and pins 9 long series impact sockets: 15, 17, 18, 19, 21, 22, 24, 27 and 30mm Supplied in a fitted metal storage box/ul>   £82.14   Quantity:

Unior 1/2in SD Impact Socket Set Standard & Long Series - (Product #01906)

Set contains: 6 standard length impact sockets: 17, 18, 19, 21, 22 and 24mm 6 long series impact sockets: 17, 18, 19, 21, 22 and 24mm Supplied in a fitted metal storage box/ul>   £78.55   Quantity:

Unior 1/2in SD Impact Socket Set Internal & External TX - (Product #01907)

Set contains: 7 intenal TX impact sockets: E10, E12, E14, E16, E18, E20 and E24 6 external TX impact sockets: TX30, TX40, TX45, TX50, TX55 and TX60 Supplied in a fitted metal storage box/ul>   £88.73   Quantity:

---