Hand Tools

Saws

Hardpoint Saws

Floor, Laminate & Veneer Saws

Re-Sharpenable Hand Saws

Masonry, Block & Board Saws

Hacksaws

Misc Saws

Tenon & Gents Saws

Toolbox Saws

Mitre Saws & Boxes

Chalk & Builders Lines

Chisels

Clamps

Hammers

Hex & Torx Keys

Knives

Spirit & Laser Levels

Magnets

Measuring

Multitools

Planes

Pliers & Cutters

Plumbing & Pipework

Punches

Screwdrivers

Snips

Spanners & Sockets

Squares, Bevels & Gauges

Staplers & Tackers

Tool Lanyards

Torches & Batteries

Trowels

Wrenches

Powertool Accessories

Screws & Fasteners

Fixings

Abrasives

Abrasives

Safety & Workwear

Storage Products

Workshop & Site

Garden & Landscape

Decorating

Hardpoint Saws

Product Range |  Hand Tools |  Saws |  Hardpoint Saws

Bahco 244 Hardpoint Saws - (Product #00450)

Hardpoint, universal bevel ground teeth (8 points per inch) For cutting along, as well as across, the grain Screwed plastic handle with 45 and 90 degree angle cutting guides For medium thick wood materials Cannot be resharpened size 24420 - 500 mm (20") - £7.95 (+£7.95) 24422 - 560 mm (22") - £8.31 (+£8.31)     Quantity:

Bahco 244+ Barracuda Hardpoint Saw - (Product #00409)

Handsaw for medium to thick wood materials Extra thick blade for good stability Screwed two component handle for comfort 8 TPI size 24420P - 20in - £8.9524422 - 22in - £9.39     Quantity:

Irwin Jack Xpert Hardpoint Saws - (Product #00408)

Triple ground teeth for ultimate cutting performance 1mm rigid nose blade for maximum stability Soft grip handle with finger guide Ideally suited for cutting hardwood, and for acurate finishing cuts 3 models available: Fine (10tpi), Universal (8tpi) & Coarse (8tpi) Also available with low friction PTFE coating for improved efficiency and wear resistance size 10505555 - Fine - 375mm (15") - £9.0510505556 - Fine - 500mm (20") - £9.8810505543 - Fine - 550mm (22") - £11.0010505602 - Fine - 500mm (20") PTFE Coated - £11.5010505603 - Fine - 550mm (22") PTFE Coated - £12.6210505538 - Universal - 375mm (15") - £9.0510505539 - Universal - 450mm (18") - £9.2910505540 - Universal - 500mm (20") - £9.8810505541 - Universal - 550mm (22") - £10.5710505544 - Universal - 375mm (15") PTFE Coated - £10.6710505545 - Universal - 500mm (20") PTFE Coated - £11.5010505546 - Universal - 550mm (22") PTFE Coated - £12.1910505542 - Coarse - 550mm (22") - £11.3010505547 - Coarse - 550mm (22") PTFE Coated - £13.00     Quantity:

Bahco Superior XT Handsaws - (Product #00451)

Professional handsaw for coarse or thick materials Unique hardpoint XT-toothing Thick blade for high precision and straight cutting Low-friction, rust-protective coating (not on 2500XT) Screwed, one-piece two-component handle 2500XT model - 10 PPI, 2600XT model - 10 PPI, 2700XP model 8PPI size 250022XT 22in - £18.03260016XT 16n - £17.32260019XT 19in - £17.91260022XT 22in - £18.57270022XT 22in - £18.57270024XT 24in - £19.20     Quantity:

Irwin Jack 880 Universal Hardpoint Saws - (Product #00480)

Hard point teeth for longer life (8 points per inch) High quality steel blade that is stable and ensures maximum power transfer New, ergonomically designed soft touch handle for increased grip and enhanced comfort Razor sharp, double-ground teeth that cut in both the push and pull stroke for faster cutting with less effort Thicker, deeper blade for improved control through increased rigidity size 880UN20 - 508 mm (20") - £8.11880UN22 - 560 mm (22") - £8.34     Quantity:

Bahco Profcut GT Hardpoint Handsaws - (Product #00410)

Professional handsaw for medium thick materials Three side ground, super sharp GT-toothing for high cutting speed Hard point teeth for long lasting sharpness Screwed, one-piece, two-component handle Model GT7 - 8TPI, GT9 - 10TPI Also available with low friction PTFE coating for improved efficiency and wear resistance Size - TPI PC19GT7 - 19in - 8 - £10.59PC19GT9 - 19in - 10 - £10.59PC22GT7 - 22in - 8 - £10.97PC22GT9 - 22in - 10 - £10.97PCP19GT7 - 19in coated - 8 - £12.09PCP19GT9 - 19in coated - 10 - £12.09PCP22GT7 - 22in coated - 8 - £12.45PCP22GT9 - 22in coated - 10 - £12.45     Quantity:

Irwin Jack 990 Fine Cut Hardpoint Saw - 990UHP550 - (Product #00483)

Hardpoint, universal bevel ground teeth (10 points per inch) Similar to Jack 880 but with finer teeth for precision cutting 560mm (22") long Cuts down, as well as across, the grain Soft grip handle with 45 and 90 degree angle cutting guides Ideal for use on plywood, chipboard and other man made materials Cannot be resharpened   £8.34   Quantity:

Irwin Jack 770 Cross Cut Coarse Hardpoint Saws - 770UHP550 - (Product #00481)

Hardpoint, fleam ground teeth (8 points per inch), cut in both directions For fast cutting down, as well as across, the grain Soft grip handle with 45 and 90 degree angle cutting guides The ideal jobbing builders' saw Length 560mm (22in)   £8.34   Quantity:

Stanley 22in Fatmax Hardpoint Saw - 220530 - (Product #00414)

Integral soft touch handle Hardpoint teeth Aggressive triple bevel teeth for a fast clean cut 1mm thick blade reduces snagging Low friction Appliflon coating protects against rust and cuts faster Clip on blade guard 45 and 90 degree angles on handle 7tpi for cuts across and down the grain   £13.48   Quantity:

Stanley Jet Cut SP Saw - (Product #00415)

Integral soft touch handle Hardpoint teeth Aggressive triple bevel teeth for a fast clean cut Group set teeth for fast cut 45 and 90 degree angles on handle Ideal for softwoods, laminated boards and PVC 7tpi for cuts across and down the grain size 315288 - 500mm (20") - £10.43315289 - 550mm (22") - £11.92     Quantity:

Stanley Jet Cut Fine Saw - (Product #00416)

Integral soft touch handle Hardpoint teeth Aggressive triple bevel teeth for a fast clean cut 45 and 90 degree angles on handle Ideal for hard and softwoods where a high quality finish is needed 11tpi size 315599 - 500mm (20") - £10.43315244 - 550mm (22") - £11.92     Quantity:

Stanley Universal HP Saw - (Product #00417)

Integral soft touch handle Hardpoint teeth Universal tooth shape for cutting most wood types 45 and 90 degree angles on handle size 120002 - 375mm (15") - £5.96120008 - 500mm (20") - £7.44120009 - 550mm (22") - £8.19     Quantity:

Stanley Universal Saw - 697055 - (Product #00418)

8 TPI hardpoint blade Comfortable ABS handle Ideal for most tradesman 45 and 90 degree angles on handle   £5.96   Quantity:

---