Hand Tools

Punches

Chalk & Builders Lines

Chisels

Clamps

Hammers

Hex & Torx Keys

Knives

Spirit & Laser Levels

Magnets

Measuring

Multitools

Planes

Pliers & Cutters

Plumbing & Pipework

Saws

Screwdrivers

Snips

Spanners & Sockets

Squares, Bevels & Gauges

Staplers & Tackers

Tool Lanyards

Torches & Batteries

Trowels

Wrenches

Powertool Accessories

Screws & Fasteners

Fixings

Abrasives

Adhesives & Sealants

Safety & Workwear

Storage Products

Workshop & Site

Garden & Landscape

Decorating

Punches

Product Range |  Hand Tools |  Punches

Stanley Dynagrip Nail Punches - (Product #01305)

Steel fully hardened and tempered for wear resistance Moulded elastomer jacket for improved grip 25% longer length Long bevelled tip for easier nail alignment 3 colour coded sizes Tips are cupped and chamfered 3 piece set available size 058911 - 0.8mm (1/32") - £3.33058912 - 1.6 mm (1/16") - £3.33058913 - 2.4 mm (3/32") - £3.33058930 - Set of 3 - £8.33     Quantity:

Stanley Nail Punches - (Product #01306)

Steel hardened and tempered for wear resistance Finely knurled shaft for easy grip in use Square striking face with chamfered edgeds Tips are cupped and chamfered Length: 102mm size 058112 - 1.6 mm (1/16") - £2.15058113 - 2.4 mm (3/32") - £2.15058114 - 3.2mm (1/8") - £2.15     Quantity:

Stanley Square Head Centre Punch - 058120 - (Product #01307)

Hardened and tempered alloy steel centre punch Finely knurled shaft for easy grip in use Square striking face with chamfered edges 3 mm diameter, 101mm length   £2.15   Quantity:

Priory 44 Centre Punches - (Product #01300)

90 degree ground, pointed tip for drill centering Carbon steel body, hardened and tempered for continuous use Square head provides a large striking area, prevents tool rolling off bench The body is knurled to provide a secure grip - length 100mm (4") size 44116 - 1.6 mm (1/16") - £2.3944332 - 2.4 mm (3/32") - £2.394418 - 3.2 mm (1/8") - £2.3944532 - 4.0 mm (5/32") - £2.3944316 - 4.8 mm (3/16") - £2.394414 - 6.4 mm (1/4") - £2.39Set of 4 (1.6, 2.4, 3.2, 4.8mm) - £9.55     Quantity:

Bahco Centre Punches - (Product #01303)

Centre punch with hexagonal shank Fully polished steel surface, with brilliant chrome finish Material: Vanadium Extra size CP564 - 2.0 mm (5/64") - £2.56CP532 - 4.0 mm (3/32") - £2.84CP316 - 5.0 mm (3/16") - £3.15CP14 - 6.0 mm (1/4") - £3.40CP516 - 8.0 mm (5/16") - £3.40     Quantity:

Bahco Drift Parallel Pin Punches - (Product #01304)

Drift punch with hexagonal shank Fully polished steel surface, with brilliant chrome finish Material: Vanadium Extra size PPP564 - 2.0 mm (5/64") - £2.84PPP18 - 3.0mm (1/8") - £2.84PPP532 - 4.0 mm (5/32") - £2.90PPP316 - 5.0 mm (3/16") - £2.90PPP14 - 6.0 mm (1/4") - £3.40PPP516 - .0 mm (5/16") - £3.40PPP932 - 7.0mm (9/32") - £3.40PPP38 - 10.0 (3/8") - £3.40     Quantity:

Priory 66 Nail Punches - (Product #01301)

Slightly cupped, flat point for driving nails below the surface of wood Carbon steel body, hardened and tempered for continuous use Square head provides a large striking area, prevents tool rolling off bench The body is knurled to provide a secure grip size 66132 - 0.8 mm (1/32") - £2.3366116 - 1.5 mm (1/16") - £ 2.3366332 - 2.5 mm (3/32") - £ 2.336618 - 3.0 mm (1/8") - £ 2.3366532 - 4.0 mm (5/32") - £ 2.3366316 - 5.0 mm (3/16") - £ 2.33     Quantity:

Bahco Nail Punches - (Product #01302)

Nail punch with plastic handle Fully polished steel surface, with brilliant chrome finish made from vanadium extra size NP564 - 2.0 mm (5/64") - £2.05NP332 - 2.5 mm (3/32") - £2.05NP18 - 3.2 mm (1/8") - £2.05NP532 - 4.0 mm (5/32") - £2.05     Quantity:

---